dmesg - Run 1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-19-generic (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #30-Ubuntu SMP Wed May 1 16:35:23 UTC 2013 (Ubuntu 3.8.0-19.30-generic 3.8.8)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009385efff] usable
BIOS-e820: [mem 0x000000009385f000-0x000000009db72fff] reserved
BIOS-e820: [mem 0x000000009db73000-0x000000009de31fff] usable
BIOS-e820: [mem 0x000000009de32000-0x000000009ded1fff] ACPI NVS
BIOS-e820: [mem 0x000000009ded2000-0x000000009ea44fff] reserved
BIOS-e820: [mem 0x000000009ea45000-0x000000009ea45fff] usable
BIOS-e820: [mem 0x000000009ea46000-0x000000009ec4bfff] ACPI NVS
BIOS-e820: [mem 0x000000009ec4c000-0x000000009f063fff] usable
BIOS-e820: [mem 0x000000009f064000-0x000000009f7f2fff] reserved
BIOS-e820: [mem 0x000000009f7f3000-0x000000009f7fffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000043effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./FM2A85X-ITX, BIOS P1.50 05/04/2013
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x43f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFE0000000 write-back
2 base 00009F800000 mask FFFFFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000043f000000 aka 17392M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2552MB, range: 8MB, type UC
total RAM covered: 2552M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2552MB, range: 8MB, type UC
e820: update [mem 0x9f800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x9f800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd7c0-0x000fd7cf] mapped at [ffff8800000fd7c0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x9f7fffff]
[mem 0x00000000-0x7fffffff] page 1G
[mem 0x80000000-0x9f7fffff] page 2M
kernel direct mapping tables up to 0x9f7fffff @ [mem 0x1fffe000-0x1fffffff]
init_memory_mapping: [mem 0x100001000-0x43effffff]
[mem 0x100001000-0x1001fffff] page 4k
[mem 0x100200000-0x13fffffff] page 2M
[mem 0x140000000-0x3ffffffff] page 1G
[mem 0x400000000-0x43effffff] page 2M
kernel direct mapping tables up to 0x43effffff @ [mem 0x9f7fc000-0x9f7fffff]
RAMDISK: [mem 0x360c0000-0x37057fff]
ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
ACPI: XSDT 000000009dec2080 0007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 000000009dec7e00 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20121018/tbfadt-598)
ACPI: DSDT 000000009dec2190 05C69 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 000000009decae80 00040
ACPI: APIC 000000009dec7ef8 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 000000009dec7f70 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 000000009dec7fb8 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: AAFT 000000009dec7ff8 000E7 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: HPET 000000009dec80e0 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: IVRS 000000009dec8118 00070 (v02 AMD ANNAPURN 00000001 AMD 00000000)
ACPI: SSDT 000000009dec8188 00B9C (v01 AMD ANNAPURN 00000001 AMD 00000001)
ACPI: SSDT 000000009dec8d28 004B7 (v02 AMD ANNAPURN 00000001 MSFT 04000000)
ACPI: CRAT 000000009dec91e0 002F8 (v01 AMD ANNAPURN 00000001 AMD 00000001)
ACPI: BGRT 000000009dec94d8 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043effffff]
Initmem setup node 0 [mem 0x00000000-0x43effffff]
NODE_DATA [mem 0x43effb000-0x43effffff]
[ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042ee00000-ffff88043e5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x43effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009dfff]
node 0: [mem 0x00100000-0x9385efff]
node 0: [mem 0x9db73000-0x9de31fff]
node 0: [mem 0x9ea45000-0x9ea45fff]
node 0: [mem 0x9ec4c000-0x9f063fff]
node 0: [mem 0x9f7f3000-0x9f7fffff]
node 0: [mem 0x100001000-0x43effffff]
On node 0 totalpages: 4009681
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3912 pages, LIFO batch:0
DMA32 zone: 9406 pages used for memmap
DMA32 zone: 592518 pages, LIFO batch:31
Normal zone: 53184 pages used for memmap
Normal zone: 3350591 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000009385f000 - 000000009db73000
PM: Registered nosave memory: 000000009de32000 - 000000009ded2000
PM: Registered nosave memory: 000000009ded2000 - 000000009ea45000
PM: Registered nosave memory: 000000009ea46000 - 000000009ec4c000
PM: Registered nosave memory: 000000009f064000 - 000000009f7f3000
PM: Registered nosave memory: 000000009f800000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
PM: Registered nosave memory: 00000000fed01000 - 00000000fed80000
PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000ff800000
PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
PM: Registered nosave memory: 0000000100000000 - 0000000100001000
e820: [mem 0x9f800000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88043ec00000 s85056 r8192 d21440 u524288
pcpu-alloc: s85056 r8192 d21440 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3947021
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 88000000
PM: Registered nosave memory: 0000000088000000 - 000000008c000000
Memory: 15620928k/17809408k available (7006k kernel code, 1770684k absent, 417796k reserved, 6238k data, 992k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
NR_IRQS:16640 nr_irqs:712 16
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 65011712 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3692.987 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7385.97 BogoMIPS (lpj=14771948)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 009f800000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26690 entries in 105 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A10-6700 APU with Radeon(tm) HD Graphics (fam: 15, model: 13, stepping: 01)
Performance Events:
perf: AMD core performance counters detected
AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 OK
Brought up 4 CPUs
smpboot: Total of 4 processors activated (29543.89 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x9de32000-0x9ded1fff] (655360 bytes)
PM: Registering ACPI NVS region [mem 0x9ea46000-0x9ec4bfff] (2121728 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
pci 0000:00:00.2: [1022:1419] type 00 class 0x080600
pci 0000:00:01.0: [1002:990c] type 00 class 0x030000
pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
pci 0000:00:01.0: reg 18: [mem 0xff700000-0xff73ffff]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
pci 0000:00:01.1: reg 10: [mem 0xff740000-0xff743fff]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
pci 0000:00:10.0: reg 10: [mem 0xff746000-0xff747fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.1: [1022:7812] type 00 class 0x0c0330
pci 0000:00:10.1: reg 10: [mem 0xff744000-0xff745fff 64bit]
pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
pci 0000:00:11.0: reg 24: [mem 0xff74d000-0xff74d7ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xff74c000-0xff74cfff]
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xff74b000-0xff74b0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xff74a000-0xff74afff]
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xff749000-0xff7490ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
pci 0000:00:14.5: reg 10: [mem 0xff748000-0xff748fff]
pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: PCI bridge to [bus 02]
pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
pci 0000:00:15.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x19) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0x9385f000-0x93ffffff]
e820: reserve RAM buffer [mem 0x9de32000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9ea46000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9f064000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9f800000-0x9fffffff]
e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xa0000000-0xbfffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [mem 0xfeb80000-0xfebfffff] could not be reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x040b] has been reserved
system 00:03: [io 0x04d6] has been reserved
system 00:03: [io 0x0c00-0x0c01] has been reserved
system 00:03: [io 0x0c14] has been reserved
system 00:03: [io 0x0c50-0x0c51] has been reserved
system 00:03: [io 0x0c52] has been reserved
system 00:03: [io 0x0c6c] has been reserved
system 00:03: [io 0x0c6f] has been reserved
system 00:03: [io 0x0cd0-0x0cd1] has been reserved
system 00:03: [io 0x0cd2-0x0cd3] has been reserved
system 00:03: [io 0x0cd4-0x0cd5] has been reserved
system 00:03: [io 0x0cd6-0x0cd7] has been reserved
system 00:03: [io 0x0cd8-0x0cdf] has been reserved
system 00:03: [io 0x0800-0x089f] has been reserved
system 00:03: [io 0x0b20-0x0b3f] has been reserved
system 00:03: [io 0x0900-0x090f] has been reserved
system 00:03: [io 0x0910-0x091f] has been reserved
system 00:03: [io 0xfe00-0xfefe] has been reserved
system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:03: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:03: [mem 0xff800000-0xffffffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x0290-0x029f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [dma 4]
pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:14.4: PCI bridge to [bus 01]
pci 0000:00:15.0: PCI bridge to [bus 02]
pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
pci 0000:00:15.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 4 [io 0x0000-0x03af]
pci_bus 0000:01: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:01: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:01: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:01: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15968k freed
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features: PreF PPR GT IA
AMD-Vi: Interrupt remapping enabled
pci 0000:00:00.2: irq 40 for MSI/MSI-X
AMD-Vi: Lazy IO/TLB flushing enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x8f85f000-0x9385f000] (64MB) mapped at [ffff88008f85f000-ffff88009385efff]
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1372558282.604:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 30540
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xff74b000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xff749000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 18, io mem 0xff74c000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-19-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.0: irq 18, io mem 0xff74a000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-19-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:13.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:14.5: irq 18, io mem 0xff748000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.8.0-19-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:14.5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
xhci_hcd 0000:00:10.0: irq 41 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 45 for MSI/MSI-X
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.8.0-19-generic xhci_hcd
usb usb6: SerialNumber: 0000:00:10.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7
usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 3.8.0-19-generic xhci_hcd
usb usb7: SerialNumber: 0000:00:10.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
xhci_hcd 0000:00:10.1: irq 46 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 47 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 48 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 49 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 50 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.8.0-19-generic xhci_hcd
usb usb8: SerialNumber: 0000:00:10.1
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.8.0-19-generic xhci_hcd
usb usb9: SerialNumber: 0000:00:10.1
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 4fb521df0b0fa81f775431361b8076d5d0f1869a'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:07: setting system clock to 2013-06-30 02:11:23 UTC (1372558283)
powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead.
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 992k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1176k freed
Freeing unused kernel memory: 1080k freed
udevd[109]: starting version 175
Disabling lock debugging due to kernel taint
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: irq 51 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 7 ports 6 Gbps 0x7f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part sxs
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
ata1: SATA max UDMA/133 abar m2048@0xff74d000 port 0xff74d100 irq 51
ata2: SATA max UDMA/133 abar m2048@0xff74d000 port 0xff74d180 irq 51
ata3: SATA max UDMA/133 abar m2048@0xff74d000 port 0xff74d200 irq 51
ata4: SATA max UDMA/133 abar m2048@0xff74d000 port 0xff74d280 irq 51
ata5: SATA max UDMA/133 abar m2048@0xff74d000 port 0xff74d300 irq 51
ata6: SATA max UDMA/133 abar m2048@0xff74d000 port 0xff74d380 irq 51
ata7: SATA max UDMA/133 abar m2048@0xff74d000 port 0xff74d400 irq 51
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: irq 52 for MSI/MSI-X
r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90011bcc000, bc:5f:f4:ac:7b:ea, XID 0c900800 IRQ 52
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=13fe, idProduct=5200
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Patriot Memory
usb 1-1: Manufacturer:
usb 1-1: SerialNumber: 07013492F8647A49
Initializing USB Mass Storage driver...
scsi7 : usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 4-2: new low-speed USB device number 2 using ohci_hcd
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: ATA-8: TOSHIBA DT01ACA300, MX6OABB0, max UDMA/133
ata4.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: ATA-8: TOSHIBA DT01ACA300, MX6OABB0, max UDMA/133
ata5.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ATA-8: TOSHIBA DT01ACA300, MX6OABB0, max UDMA/133
ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: ATA-8: TOSHIBA DT01ACA300, MX6OABB0, max UDMA/133
ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata7.00: ATA-8: TOSHIBA DT01ACA300, MX6OABB0, max UDMA/133
ata7.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: ATA-8: TOSHIBA DT01ACA300, MX6OABB0, max UDMA/133
ata6.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
ata7.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata2.00: configured for UDMA/133
ata5.00: configured for UDMA/133
ata6.00: configured for UDMA/133
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: M4-CT128M4SSD2, 0309, max UDMA/100
ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA M4-CT128M4SSD2 0309 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access ATA TOSHIBA DT01ACA3 MX6O PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA TOSHIBA DT01ACA3 MX6O PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: Attached scsi generic sg2 type 0
sda: sda1 sda2 sda3
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
scsi 3:0:0:0: Direct-Access ATA TOSHIBA DT01ACA3 MX6O PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 3:0:0:0: [sdd] 4096-byte physical blocks
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Attached SCSI disk
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 4:0:0:0: Direct-Access ATA TOSHIBA DT01ACA3 MX6O PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:0: [sde] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 4:0:0:0: [sde] 4096-byte physical blocks
scsi 5:0:0:0: Direct-Access ATA TOSHIBA DT01ACA3 MX6O PQ: 0 ANSI: 5
sd 5:0:0:0: [sdf] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 5:0:0:0: [sdf] 4096-byte physical blocks
sd 5:0:0:0: Attached scsi generic sg5 type 0
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 6:0:0:0: Direct-Access ATA TOSHIBA DT01ACA3 MX6O PQ: 0 ANSI: 5
sd 6:0:0:0: [sdg] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 6:0:0:0: [sdg] 4096-byte physical blocks
sd 6:0:0:0: Attached scsi generic sg6 type 0
sd 6:0:0:0: [sdg] Write Protect is off
sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: unknown partition table
sd 4:0:0:0: [sde] Attached SCSI disk
sdb: unknown partition table
sd 1:0:0:0: [sdb] Attached SCSI disk
sdc: unknown partition table
sd 2:0:0:0: [sdc] Attached SCSI disk
sdd: unknown partition table
sdg: unknown partition table
sd 3:0:0:0: [sdd] Attached SCSI disk
sd 6:0:0:0: [sdg] Attached SCSI disk
sdf: unknown partition table
sd 5:0:0:0: [sdf] Attached SCSI disk
Btrfs loaded
device fsid fc3b11ba-4003-4610-bb77-e64aaf516705 devid 1 transid 514 /dev/sdb
device fsid fc3b11ba-4003-4610-bb77-e64aaf516705 devid 2 transid 514 /dev/sdc
usb 4-2: New USB device found, idVendor=047d, idProduct=2043
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: Kensington U+P Keyboard
usb 4-2: Manufacturer: NOVATEK
tsc: Refined TSC clocksource calibration: 3693.284 MHz
Switching to clocksource tsc
device fsid fc3b11ba-4003-4610-bb77-e64aaf516705 devid 3 transid 514 /dev/sdd
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: NOVATEK Kensington U+P Keyboard as /devices/pci0000:00/0000:00:13.0/usb4/4-2/4-2:1.0/input/input2
hid-generic 0003:047D:2043.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK Kensington U+P Keyboard] on usb-0000:00:13.0-2/input0
input: NOVATEK Kensington U+P Keyboard as /devices/pci0000:00/0000:00:13.0/usb4/4-2/4-2:1.1/input/input3
hid-generic 0003:047D:2043.0002: input,hidraw1: USB HID v1.10 Device [NOVATEK Kensington U+P Keyboard] on usb-0000:00:13.0-2/input1
device fsid fc3b11ba-4003-4610-bb77-e64aaf516705 devid 5 transid 514 /dev/sdf
device fsid fc3b11ba-4003-4610-bb77-e64aaf516705 devid 4 transid 514 /dev/sde
device fsid fc3b11ba-4003-4610-bb77-e64aaf516705 devid 6 transid 514 /dev/sdg
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
usb 8-2: new low-speed USB device number 2 using xhci_hcd
usb 8-2: New USB device found, idVendor=046d, idProduct=c019
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-2: Product: USB Optical Mouse
usb 8-2: Manufacturer: Logitech
usb 8-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:10.1/usb8/8-2/8-2:1.0/input/input4
hid-generic 0003:046D:C019.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:10.1-2/input0
SPL: Loaded module v0.6.1-rc14
znvpair: module license 'CDDL' taints kernel.
ZFS: Loaded module v0.6.1-rc14, ZFS pool version 5000, ZFS filesystem version 5
Adding 31250428k swap on /dev/sda2. Priority:-1 extents:1 across:31250428k SS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
udevd[506]: starting version 175
lp: driver loaded but no devices found
[drm] Initialized drm 1.1.0 20060810
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
hda-intel 0000:00:01.1: Force to non-snoop mode
snd_hda_intel 0000:00:01.1: irq 53 for MSI/MSI-X
traps: blkid[602] general protection ip:7f41eb78bb9f sp:7fff46152fb0 error:0 in ld-2.17.so[7f41eb780000+23000]
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (ARUBA 0x1002:0x990C 0x1849:0x9901).
[drm] register mmio base: 0xFF700000
[drm] register mmio size: 262144
ATOM BIOS: 113
radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:00:01.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 7820084 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: irq 54 for MSI/MSI-X
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading ARUBA Microcode
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88041f613c00
radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff88041f613c04
radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff88041f613c08
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88041f613c0c
radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff88041f613c10
microcode: CPU0: patch_level=0x06001119
microcode: CPU1: patch_level=0x06001119
microcode: CPU2: patch_level=0x06001119
microcode: CPU3: patch_level=0x06001119
microcode: Microcode Update Driver: v2.00 , Peter Oruba
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 4 succeeded in 1 usecs
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 1 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] HPD1
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] CRT1: INTERNAL_UNIPHY2
[drm] CRT1: NUTMEG
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD2
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] DVI-D-1
[drm] HPD3
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY
scsi 7:0:0:0: Direct-Access Patriot Memory PMAP PQ: 0 ANSI: 6
sd 7:0:0:0: Attached scsi generic sg7 type 0
sd 7:0:0:0: [sdh] 61767680 512-byte logical blocks: (31.6 GB/29.4 GiB)
sd 7:0:0:0: [sdh] Write Protect is off
sd 7:0:0:0: [sdh] Mode Sense: 45 00 00 00
sd 7:0:0:0: [sdh] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
type=1400 audit(1372558284.739:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=761 comm="apparmor_parser"
type=1400 audit(1372558284.739:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=761 comm="apparmor_parser"
type=1400 audit(1372558284.739:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=761 comm="apparmor_parser"
[drm] Internal thermal controller without fan control
[drm] radeon: power management initialized
r8169 0000:02:00.0 p17p1: link down
IPv6: ADDRCONF(NETDEV_UP): p17p1: link is not ready
sdh: sdh1
[drm] fb mappable at 0xC114C000
[drm] vram apper at 0xC0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
sd 7:0:0:0: [sdh] Attached SCSI removable disk
Console: switching to colour frame buffer device 170x48
radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
radeon 0000:00:01.0: registered panic notifier
[drm] Initialized radeon 2.29.0 20080528 for 0000:00:01.0 on minor 0
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
r8169 0000:02:00.0 p17p1: link up
IPv6: ADDRCONF(NETDEV_CHANGE): p17p1: link becomes ready
init: failsafe main process (811) killed by TERM signal
type=1400 audit(1372558294.695:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1091 comm="apparmor_parser"
type=1400 audit(1372558294.695:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1091 comm="apparmor_parser"
type=1400 audit(1372558294.695:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1091 comm="apparmor_parser"
type=1400 audit(1372558294.699:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1093 comm="apparmor_parser"
INFO: task sync:3869 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
sync D ffff88043ed13f40 0 3869 3868 0x00000000
ffff88041ddbbd38 0000000000000082 ffff880421e19740 ffff88041ddbbfd8
ffff88041ddbbfd8 ffff88041ddbbfd8 ffff88042935ae80 ffff880421e19740
7fffffffffffffff ffff88041ddbbe88 ffff88041ddbbe90 ffff880421e19740
Call Trace:
[] schedule+0x29/0x70
[] schedule_timeout+0x1ec/0x2b0
[] ? __enqueue_entity+0x78/0x80
[] ? enqueue_entity+0x382/0x9a0
[] ? default_spin_lock_flags+0x9/0x10
[] wait_for_common+0xd7/0x180
[] ? try_to_wake_up+0x2a0/0x2a0
[] wait_for_completion+0x1d/0x20
[] sync_inodes_sb+0xa1/0x1d0
[] ? fdatawrite_one_bdev+0x20/0x20
[] sync_inodes_one_sb+0x19/0x20
[] iterate_supers+0xfa/0x100
[] sys_sync+0x35/0x90
[] system_call_fastpath+0x1a/0x1f
INFO: task sync:3903 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
sync D ffff88043ed13f40 0 3903 3902 0x00000000
ffff88041c5f7d38 0000000000000086 ffff88041c50ae80 ffff88041c5f7fd8
ffff88041c5f7fd8 ffff88041c5f7fd8 ffff88042935ae80 ffff88041c50ae80
7fffffffffffffff ffff88041c5f7e88 ffff88041c5f7e90 ffff88041c50ae80
Call Trace:
[] schedule+0x29/0x70
[] schedule_timeout+0x1ec/0x2b0
[] ? __enqueue_entity+0x78/0x80
[] ? enqueue_entity+0x382/0x9a0
[] ? default_spin_lock_flags+0x9/0x10
[] wait_for_common+0xd7/0x180
[] ? try_to_wake_up+0x2a0/0x2a0
[] wait_for_completion+0x1d/0x20
[] sync_inodes_sb+0xa1/0x1d0
[] ? fdatawrite_one_bdev+0x20/0x20
[] sync_inodes_one_sb+0x19/0x20
[] iterate_supers+0xfa/0x100
[] sys_sync+0x35/0x90
[] system_call_fastpath+0x1a/0x1f